National 13110A 30-Ton Un-Mounted Boom Truck Crane For Sale

NATIONAL CRANE SERIES 1300A

BOOM AND JIB COMBINATIONS DATA
Equipped with a 8,83 m - 30,48 m (29 ft - 100 ft) four-section boom. This model can be equipped with a 7,62 m - 13,41 m (25 ft - 44 ft) two section jib. Maximum tip height with 13,41 m (44 ft) jib is 44,63 m (153 ft).

The mounting configuration shown is based on an 85% stability factor. The complete unit must be installed on the truck in accordance with factory requirements, and a test performed to determine actual stability and counterweight requirements, since individual truck chassis vary. If bare truck weights are not met, counterweight will be required.

4536 kg (*10,000 lb ) is required at the rear axle for 360˚ stability. This weight does include the weight of the optional bed. Counterweight will be required above the 3856 kg (8500 lb) minimum bare chassis if the optional bed is not used to attain the 4536 kg (10,000 lb) stability weight.

FEATURES
• 27,2 t (30 USt) rating
• 33,52 m (110 ft) four-section boom
• Self-lubricating Easy Glide wear pads
• Internal anti-two-block
• Vision cab

NATIONAL CRANE SERIES 1300A
• 27,2 t (30 USt) maximum capacity
• 49,68 m (163 ft) with optional jib maximum vertical reach
• 36,27 m (119 ft) maximum vertical hydraulic reach

FOUR-SECTION BOOM
The 1300A Series can be equipped with a 33,52 m (110 ft) or a 30,5 m (100 ft) four-section boom. A 7,6 m - 13,4 m (25 ft - 44 ft) two-section jib is also available.

OPERATOR’S CAB
The Series 1300A’s Vision cab has a rigid powder coated steel structure and is well insulated with ample safety glass for operator visibility and comfort. A multi-position seat with arm rest and single axis joystick controls, ventilation fans, diesel heater, wipers are also included. Air conditioning is available as an option.

EASY GLIDE BOOM WEAR PADS
Easy Glide boom wear pads reduce the conditions that cause boom chatter resulting in smoother crane operation.

OUTRIGGERS
Two sets of “HO” style outriggers with 6,09 m (20 ft) span and 4,27 m (14 ft) mid span setting. Outriggers are equipped with removable ball and socket aluminum foot pads. Independent outrigger controls (umbilical design) are located at the rear of the crane and includes sight bubble level indicator.

BEST IN CLASS PERFORMANCE AND SERVICEABILITY
• The stronger standard torsion box improves rigidity, reduces truck frame flex and reduces the need for counterweight
• Speedy-reeve boom tip and sheave blocks simplify rigging changes by decreasing the time needed to change line reeving
• Crane components painted before assembly reduce the chance of rust, improve serviceability and enhance the appearance of the crane
• Internal anti-two block wiring standard on the 1300A routes the wiring through the inside of the boom eliminating the possibility of snagging the wire on obstructions
• Bearings on the boom extend and retract cables can be greased through access holes in the boom side plates and a number of internal boom parts has been reduced improving serviceability
• The Series 1300A is supplied with 360° continuous rotation standard along with the “glide swing” feature allowing free swing during rotation and a manually applied foot brake
• Adjustable swing speed comes standard on the 1300A. A control knob located on the swing motor brake release valve can be easily adjusted to the crane operator’s swing speed preference
• Oil cooler-radiator mounted on top of front outriggers with electric fan is standard

Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.