The Altec AC25-95B has a 25 ton (22t) Maximum Lifting Capacity, a 95 ft (29 m) 4-Section Boom, 3 Position Out-and-Down Outriggers,  Walk Through Control Stations , and a Typical Finished Weight of 50, 000 lbs (22, 679 kg).

STANDARD SAFETY FEATURES

• LMAP (Load Moment & Area Protection) System

• Rated Capacity Limiter • Displays: Boom Length, Boom Angle, Load on Hook, Percent of Rated Capacity

• Electronic Working Area Definition

• Operator Defined Audible Alarm Set-Points for Boom Angle, Length and Rotational Position

• Outrigger Boom Interlock System

• Outrigger Motion Alarm

• Back-Up Alarm

• Emergency Stop at Operator Controls

• Winch Drum Rotation Indicator

• Anti-Two Block Device

• Front Bumper Outrigger

• Walk-Through Control Stations

OPTIONS

• 1-Piece 26 ft (7.9 m) Jib

• 2-Piece 44 ft (13.4 m) jib, 26 ft (13.4 m) Retracted

• 2-Man Steel Platform • 370 Degree Non-Continuous Rotation

• Continuous Rotation

• 12, 000 lb (5, 443 kg) 2 Speed Winch

• Hydraulic Tool Circuit at Tail Shelf

• Hydraulic Tool Circuit at Boom Tip

• Rotation Resistant Wire Rope

• Winch Control at Load Hook Stow Point

• Hydraulic Oil Cooling System

CRANE SPECIFICATIONS

• 50, 000 lb (22, 679 kg) Maximum Lifting Capacity

• 95 ft (29 m) 4-Section Boom

• 105 ft (32 m) Maximum Sheave Height

• Stowed Travel Height of 13.25 ft (4.04 m)

• Vehicle Travel Length of 39.9 ft (12.1 m)

• 3 Position Out-and-Down Outriggers

• Full Span 18.5 ft (5.6 m)

• Mid Span 14 ft (4.3 m)

• Short Span 9 ft (2.7 m)

• Hydraulic Pilot-Operated Control System

• 12, 000 lb (5, 443 kg) Winch w/ Burst of Speed