Altec AT37G Specifications

The Altec AT37G Articulating Telescopic Boom Bucket Truck is designed for the electric utility industry with features and benefits designed to increase productivity and reduce... Show More

Specifications (2)

Altec AT37G

(Platform Aerial Lifts, Bucket Trucks & Digger Derricks : Bucket Truck Aerial Platforms)

The Altec AT37G Articulating Telescopic Boom Bucket Truck is designed for the electric utility industry with features and benefits designed to increase productivity and reduce the overall cost of constructing and maintaining overhead electrical distribution lines. Convenient features like platform access from the ground and the optional platform rotator make the AT37G one of Altec’s most popular telescopic articulating Bucket Truck Models.

General Specifications:
Ground to Bottom of Platform*:	37.8 ft (11.5 m)
Maximum Side Reach:	28.3 ft (8.6 m)
Boom Articulation (Lower Boom):	-25° to +75°
Rotation:	Continuous

Standard Features:
Features:	Altec ISO-Grip^® Control System Articulating Telescopic Aerial Device Compensated Articulating Arm Hydraulic Boom Extension Insulating, ANSI Category C, 46 kV and Below Continuous Rotation Platform, 24 x 30 x 42 in (610 x 762 x 1067 mm) Nominal Hydraulic Platform Leveling Platform Capacity – 350 lb (159 kg) Fixed 350 lb (159 kg) w/ Rotator Fully Metered Single Handle Upper Control Full Pressure, Open Center Hydraulic System Platform Access from the Ground Emergency Lowering Valve Tool Circuit at Platform Back-up Alarm Outrigger Boom Interlock System (With Outrigger Option) Outrigger Motion Alarm (With Outrigger Option)

Standard Features:

Features:

Altec ISO-Grip^® Control System
Articulating Telescopic Aerial Device
Compensated Articulating Arm
Hydraulic Boom Extension
Insulating, ANSI Category C, 46 kV and Below
Continuous Rotation
Platform, 24 x 30 x 42 in (610 x 762 x 1067 mm) Nominal
Hydraulic Platform Leveling
Platform Capacity – 350 lb (159 kg) Fixed 350 lb (159 kg) w/ Rotator
Fully Metered Single Handle Upper Control
Full Pressure, Open Center Hydraulic System
Platform Access from the Ground
Emergency Lowering Valve
Tool Circuit at Platform
Back-up Alarm
Outrigger Boom Interlock System (With Outrigger Option)
Outrigger Motion Alarm (With Outrigger Option)

Optional Features:
Options:	Non-Continuous Rotation Secondary Stowage System Engine Start/Stop Tool Circuit at Tailshelf Outriggers, Vertical 400 lb Platform Capacity Platform Cover Platform Rotator – 90° or 180° Platform, 24 x 24 x 42 in (610 x 610 x 1067 mm) Nominal

Recommended Features:
Features:	Fall Protection System Platform Liner Wheel Chocks With Outrigger Option: Outrigger Pads